class BigDecimal < Numeric
  # BigDecimal::ROUND_MODE
  type round_mode = 256
  type round_mode_integer = 1 | 2 | 3 | 4 | 5 | 6 | 7
  type round_mode_symbol = :up | :down | :half_up | :half_down | :half_even | :ceiling | :floor | :truncate | :banker | :default

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - _load(p1)
  # -->
  # Internal method used to provide marshalling support. See the Marshal module.
  #
  def self._load: (String) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal.double_fig -> integer
  # -->
  # Returns the number of digits a Float object is allowed to have; the result is
  # system-dependent:
  #
  #     BigDecimal.double_fig # => 16
  #
  def self.double_fig: () -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - interpret_loosely(p1)
  # -->
  #
  def self.interpret_loosely: (string) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal.limit(digits)
  # -->
  # Limit the number of significant digits in newly created BigDecimal numbers to
  # the specified value. Rounding is performed as necessary, as specified by
  # BigDecimal.mode.
  #
  # A limit of 0, the default, means no upper limit.
  #
  # The limit specified by this method takes less priority over any limit
  # specified to instance methods such as ceil, floor, truncate, or round.
  #
  def self.limit: (?Integer? digits) -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal.mode(mode, setting = nil) -> integer
  # -->
  # Returns an integer representing the mode settings for exception handling and
  # rounding.
  #
  # These modes control exception handling:
  #
  # *   BigDecimal::EXCEPTION_NaN.
  # *   BigDecimal::EXCEPTION_INFINITY.
  # *   BigDecimal::EXCEPTION_UNDERFLOW.
  # *   BigDecimal::EXCEPTION_OVERFLOW.
  # *   BigDecimal::EXCEPTION_ZERODIVIDE.
  # *   BigDecimal::EXCEPTION_ALL.
  #
  # Values for `setting` for exception handling:
  #
  # *   `true`: sets the given `mode` to `true`.
  # *   `false`: sets the given `mode` to `false`.
  # *   `nil`: does not modify the mode settings.
  #
  # You can use method BigDecimal.save_exception_mode to temporarily change, and
  # then automatically restore, exception modes.
  #
  # For clarity, some examples below begin by setting all exception modes to
  # `false`.
  #
  # This mode controls the way rounding is to be performed:
  #
  # *   BigDecimal::ROUND_MODE
  #
  # You can use method BigDecimal.save_rounding_mode to temporarily change, and
  # then automatically restore, the rounding mode.
  #
  # **NaNs**
  #
  # Mode BigDecimal::EXCEPTION_NaN controls behavior when a BigDecimal NaN is
  # created.
  #
  # Settings:
  #
  # *   `false` (default): Returns `BigDecimal('NaN')`.
  # *   `true`: Raises FloatDomainError.
  #
  # Examples:
  #
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, false) # => 0
  #     BigDecimal('NaN')                                 # => NaN
  #     BigDecimal.mode(BigDecimal::EXCEPTION_NaN, true)  # => 2
  #     BigDecimal('NaN') # Raises FloatDomainError
  #
  # **Infinities**
  #
  # Mode BigDecimal::EXCEPTION_INFINITY controls behavior when a BigDecimal
  # Infinity or -Infinity is created. Settings:
  #
  # *   `false` (default): Returns `BigDecimal('Infinity')` or
  #     `BigDecimal('-Infinity')`.
  # *   `true`: Raises FloatDomainError.
  #
  # Examples:
  #
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, false)     # => 0
  #     BigDecimal('Infinity')                                # => Infinity
  #     BigDecimal('-Infinity')                               # => -Infinity
  #     BigDecimal.mode(BigDecimal::EXCEPTION_INFINITY, true) # => 1
  #     BigDecimal('Infinity')  # Raises FloatDomainError
  #     BigDecimal('-Infinity') # Raises FloatDomainError
  #
  # **Underflow**
  #
  # Mode BigDecimal::EXCEPTION_UNDERFLOW controls behavior when a BigDecimal
  # underflow occurs. Settings:
  #
  # *   `false` (default): Returns `BigDecimal('0')` or `BigDecimal('-Infinity')`.
  # *   `true`: Raises FloatDomainError.
  #
  # Examples:
  #
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, false)      # => 0
  #     def flow_under
  #       x = BigDecimal('0.1')
  #       100.times { x *= x }
  #     end
  #     flow_under                                             # => 100
  #     BigDecimal.mode(BigDecimal::EXCEPTION_UNDERFLOW, true) # => 4
  #     flow_under # Raises FloatDomainError
  #
  # **Overflow**
  #
  # Mode BigDecimal::EXCEPTION_OVERFLOW controls behavior when a BigDecimal
  # overflow occurs. Settings:
  #
  # *   `false` (default): Returns `BigDecimal('Infinity')` or
  #     `BigDecimal('-Infinity')`.
  # *   `true`: Raises FloatDomainError.
  #
  # Examples:
  #
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, false)     # => 0
  #     def flow_over
  #       x = BigDecimal('10')
  #       100.times { x *= x }
  #     end
  #     flow_over                                             # => 100
  #     BigDecimal.mode(BigDecimal::EXCEPTION_OVERFLOW, true) # => 1
  #     flow_over # Raises FloatDomainError
  #
  # **Zero Division**
  #
  # Mode BigDecimal::EXCEPTION_ZERODIVIDE controls behavior when a zero-division
  # occurs. Settings:
  #
  # *   `false` (default): Returns `BigDecimal('Infinity')` or
  #     `BigDecimal('-Infinity')`.
  # *   `true`: Raises FloatDomainError.
  #
  # Examples:
  #
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, false)       # => 0
  #     one = BigDecimal('1')
  #     zero = BigDecimal('0')
  #     one / zero                                              # => Infinity
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ZERODIVIDE, true) # => 16
  #     one / zero # Raises FloatDomainError
  #
  # **All Exceptions**
  #
  # Mode BigDecimal::EXCEPTION_ALL controls all of the above:
  #
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, false) # => 0
  #     BigDecimal.mode(BigDecimal::EXCEPTION_ALL, true)  # => 23
  #
  # **Rounding**
  #
  # Mode BigDecimal::ROUND_MODE controls the way rounding is to be performed; its
  # `setting` values are:
  #
  # *   `ROUND_UP`: Round away from zero. Aliased as `:up`.
  # *   `ROUND_DOWN`: Round toward zero. Aliased as `:down` and `:truncate`.
  # *   `ROUND_HALF_UP`: Round toward the nearest neighbor; if the neighbors are
  #     equidistant, round away from zero. Aliased as `:half_up` and `:default`.
  # *   `ROUND_HALF_DOWN`: Round toward the nearest neighbor; if the neighbors are
  #     equidistant, round toward zero. Aliased as `:half_down`.
  # *   `ROUND_HALF_EVEN` (Banker's rounding): Round toward the nearest neighbor;
  #     if the neighbors are equidistant, round toward the even neighbor. Aliased
  #     as `:half_even` and `:banker`.
  # *   `ROUND_CEILING`: Round toward positive infinity. Aliased as `:ceiling` and
  #     `:ceil`.
  # *   `ROUND_FLOOR`: Round toward negative infinity. Aliased as `:floor:`.
  #
  def self.mode: (round_mode, ?(round_mode_integer | round_mode_symbol)) -> Integer
               | (Integer exception_mode, ?bool? setting) -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal.save_exception_mode { ... }
  # -->
  # Execute the provided block, but preserve the exception mode
  #
  #     BigDecimal.save_exception_mode do
  #       BigDecimal.mode(BigDecimal::EXCEPTION_OVERFLOW, false)
  #       BigDecimal.mode(BigDecimal::EXCEPTION_NaN, false)
  #
  #       BigDecimal(BigDecimal('Infinity'))
  #       BigDecimal(BigDecimal('-Infinity'))
  #       BigDecimal(BigDecimal('NaN'))
  #     end
  #
  # For use with the BigDecimal::EXCEPTION_*
  #
  # See BigDecimal.mode
  #
  def self.save_exception_mode: () { (?nil) -> void } -> void

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal.save_limit { ... }
  # -->
  # Execute the provided block, but preserve the precision limit
  #
  #     BigDecimal.limit(100)
  #     puts BigDecimal.limit
  #     BigDecimal.save_limit do
  #         BigDecimal.limit(200)
  #         puts BigDecimal.limit
  #     end
  #     puts BigDecimal.limit
  #
  def self.save_limit: () { (?nil) -> void } -> void

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal.save_rounding_mode { ... }
  # -->
  # Execute the provided block, but preserve the rounding mode
  #
  #     BigDecimal.save_rounding_mode do
  #       BigDecimal.mode(BigDecimal::ROUND_MODE, :up)
  #       puts BigDecimal.mode(BigDecimal::ROUND_MODE)
  #     end
  #
  # For use with the BigDecimal::ROUND_*
  #
  # See BigDecimal.mode
  #
  def self.save_rounding_mode: () { (?nil) -> void } -> void

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - a % b
  #   - a.modulo(b)
  # -->
  # Returns the modulus from dividing by b.
  #
  # See BigDecimal#divmod.
  #
  def %: (real | BigDecimal) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - *(p1)
  # -->
  #
  def *: (real | BigDecimal) -> BigDecimal
       | (Complex) -> Complex

  # <!--
  #   rdoc-file=lib/bigdecimal.rb
  #   - self ** other -> bigdecimal
  # -->
  # Returns the BigDecimal value of `self` raised to power `other`:
  #
  #     b = BigDecimal('3.14')
  #     b ** 2              # => 0.98596e1
  #     b ** 2.0            # => 0.98596e1
  #     b ** Rational(2, 1) # => 0.98596e1
  #
  # Related: BigDecimal#power.
  #
  def **: (real | BigDecimal) -> BigDecimal
        | (Complex) -> Complex

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - self + value -> bigdecimal
  # -->
  # Returns the BigDecimal sum of `self` and `value`:
  #
  #     b = BigDecimal('111111.111') # => 0.111111111e6
  #     b + 2                        # => 0.111113111e6
  #     b + 2.0                      # => 0.111113111e6
  #     b + Rational(2, 1)           # => 0.111113111e6
  #     b + Complex(2, 0)            # => (0.111113111e6+0i)
  #
  # See the [Note About
  # Precision](BigDecimal.html#class-BigDecimal-label-A+Note+About+Precision).
  #
  def +: (real | BigDecimal) -> BigDecimal
       | (Complex) -> Complex

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - +big_decimal -> self
  # -->
  # Returns `self`:
  #
  #     +BigDecimal(5)  # => 0.5e1
  #     +BigDecimal(-5) # => -0.5e1
  #
  def +@: () -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - self - value -> bigdecimal
  # -->
  # Returns the BigDecimal difference of `self` and `value`:
  #
  #     b = BigDecimal('333333.333') # => 0.333333333e6
  #     b - 2                        # => 0.333331333e6
  #     b - 2.0                      # => 0.333331333e6
  #     b - Rational(2, 1)           # => 0.333331333e6
  #     b - Complex(2, 0)            # => (0.333331333e6+0i)
  #
  # See the [Note About
  # Precision](BigDecimal.html#class-BigDecimal-label-A+Note+About+Precision).
  #
  def -: (real | BigDecimal) -> BigDecimal
       | (Complex) -> Complex

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - -self -> bigdecimal
  # -->
  # Returns the BigDecimal negation of self:
  #
  #     b0 = BigDecimal('1.5')
  #     b1 = -b0 # => -0.15e1
  #     b2 = -b1 # => 0.15e1
  #
  def -@: () -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - a / b   -> bigdecimal
  # -->
  # Divide by the specified value.
  #
  # The result precision will be the precision of the larger operand, but its
  # minimum is 2*Float::DIG.
  #
  # See BigDecimal#div. See BigDecimal#quo.
  #
  def /: (real | BigDecimal) -> BigDecimal
       | (Complex) -> Complex

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - self < other -> true or false
  # -->
  # Returns `true` if `self` is less than `other`, `false` otherwise:
  #
  #     b = BigDecimal('1.5') # => 0.15e1
  #     b < 2                 # => true
  #     b < 2.0               # => true
  #     b < Rational(2, 1)    # => true
  #     b < 1.5               # => false
  #
  # Raises an exception if the comparison cannot be made.
  #
  def <: (real | BigDecimal) -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - self <= other -> true or false
  # -->
  # Returns `true` if `self` is less or equal to than `other`, `false` otherwise:
  #
  #     b = BigDecimal('1.5') # => 0.15e1
  #     b <= 2                # => true
  #     b <= 2.0              # => true
  #     b <= Rational(2, 1)   # => true
  #     b <= 1.5              # => true
  #     b < 1                 # => false
  #
  # Raises an exception if the comparison cannot be made.
  #
  def <=: (real | BigDecimal) -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - <=>(p1)
  # -->
  # The comparison operator. a <=> b is 0 if a == b, 1 if a > b, -1 if a < b.
  #
  def <=>: (untyped) -> Integer?

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - ==(p1)
  # -->
  # Tests for value equality; returns true if the values are equal.
  #
  # The == and === operators and the eql? method have the same implementation for
  # BigDecimal.
  #
  # Values may be coerced to perform the comparison:
  #
  #     BigDecimal('1.0') == 1.0  #=> true
  #
  def ==: (untyped) -> bool

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Tests for value equality; returns true if the values are equal.
  #
  # The == and === operators and the eql? method have the same implementation for
  # BigDecimal.
  #
  # Values may be coerced to perform the comparison:
  #
  #     BigDecimal('1.0') == 1.0  #=> true
  #
  def ===: (untyped) -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - self > other -> true or false
  # -->
  # Returns `true` if `self` is greater than `other`, `false` otherwise:
  #
  #     b = BigDecimal('1.5')
  #     b > 1              # => true
  #     b > 1.0            # => true
  #     b > Rational(1, 1) # => true
  #     b > 2              # => false
  #
  # Raises an exception if the comparison cannot be made.
  #
  def >: (real | BigDecimal) -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - self >= other -> true or false
  # -->
  # Returns `true` if `self` is greater than or equal to `other`, `false`
  # otherwise:
  #
  #     b = BigDecimal('1.5')
  #     b >= 1              # => true
  #     b >= 1.0            # => true
  #     b >= Rational(1, 1) # => true
  #     b >= 1.5            # => true
  #     b > 2               # => false
  #
  # Raises an exception if the comparison cannot be made.
  #
  def >=: (real | BigDecimal) -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - _dump -> string
  # -->
  # Returns a string representing the marshalling of `self`. See module Marshal.
  #
  #     inf = BigDecimal('Infinity') # => Infinity
  #     dumped = inf._dump           # => "9:Infinity"
  #     BigDecimal._load(dumped)     # => Infinity
  #
  def _dump: (?untyped) -> String

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - abs -> bigdecimal
  # -->
  # Returns the BigDecimal absolute value of `self`:
  #
  #     BigDecimal('5').abs  # => 0.5e1
  #     BigDecimal('-3').abs # => 0.3e1
  #
  def abs: () -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - add(value, ndigits) -> new_bigdecimal
  # -->
  # Returns the BigDecimal sum of `self` and `value` with a precision of `ndigits`
  # decimal digits.
  #
  # When `ndigits` is less than the number of significant digits in the sum, the
  # sum is rounded to that number of digits, according to the current rounding
  # mode; see BigDecimal.mode.
  #
  # Examples:
  #
  #     # Set the rounding mode.
  #     BigDecimal.mode(BigDecimal::ROUND_MODE, :half_up)
  #     b = BigDecimal('111111.111')
  #     b.add(1, 0)               # => 0.111112111e6
  #     b.add(1, 3)               # => 0.111e6
  #     b.add(1, 6)               # => 0.111112e6
  #     b.add(1, 15)              # => 0.111112111e6
  #     b.add(1.0, 15)            # => 0.111112111e6
  #     b.add(Rational(1, 1), 15) # => 0.111112111e6
  #
  def add: (real | BigDecimal value, Integer digits) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - ceil(n)
  # -->
  # Return the smallest integer greater than or equal to the value, as a
  # BigDecimal.
  #
  #     BigDecimal('3.14159').ceil #=> 4
  #     BigDecimal('-9.1').ceil #=> -9
  #
  # If n is specified and positive, the fractional part of the result has no more
  # than that many digits.
  #
  # If n is specified and negative, at least that many digits to the left of the
  # decimal point will be 0 in the result.
  #
  #     BigDecimal('3.14159').ceil(3) #=> 3.142
  #     BigDecimal('13345.234').ceil(-2) #=> 13400.0
  #
  def ceil: () -> Integer
          | (int n) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - clone()
  # -->
  #
  def clone: () -> self

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - coerce(p1)
  # -->
  # The coerce method provides support for Ruby type coercion. It is not enabled
  # by default.
  #
  # This means that binary operations like + * / or - can often be performed on a
  # BigDecimal and an object of another type, if the other object can be coerced
  # into a BigDecimal value.
  #
  # e.g.
  #     a = BigDecimal("1.0")
  #     b = a / 2.0 #=> 0.5
  #
  # Note that coercing a String to a BigDecimal is not supported by default; it
  # requires a special compile-time option when building Ruby.
  #
  def coerce: (Numeric) -> [ BigDecimal, BigDecimal ]

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - div(value)  -> integer
  #   - div(value, digits)  -> bigdecimal or integer
  # -->
  # Divide by the specified value.
  #
  # digits
  # :   If specified and less than the number of significant digits of the result,
  #     the result is rounded to that number of digits, according to
  #     BigDecimal.mode.
  #
  #     If digits is 0, the result is the same as for the / operator or #quo.
  #
  #     If digits is not specified, the result is an integer, by analogy with
  #     Float#div; see also BigDecimal#divmod.
  #
  #
  # See BigDecimal#/. See BigDecimal#quo.
  #
  # Examples:
  #
  #     a = BigDecimal("4")
  #     b = BigDecimal("3")
  #
  #     a.div(b, 3)  # => 0.133e1
  #
  #     a.div(b, 0)  # => 0.1333333333333333333e1
  #     a / b        # => 0.1333333333333333333e1
  #     a.quo(b)     # => 0.1333333333333333333e1
  #
  #     a.div(b)     # => 1
  #
  def div: (real | BigDecimal value) -> Integer
         | (real | BigDecimal value, int digits) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - divmod(value)
  # -->
  # Divides by the specified value, and returns the quotient and modulus as
  # BigDecimal numbers. The quotient is rounded towards negative infinity.
  #
  # For example:
  #
  #     require 'bigdecimal'
  #
  #     a = BigDecimal("42")
  #     b = BigDecimal("9")
  #
  #     q, m = a.divmod(b)
  #
  #     c = q * b + m
  #
  #     a == c  #=> true
  #
  # The quotient q is (a/b).floor, and the modulus is the amount that must be
  # added to q * b to get a.
  #
  def divmod: (real | BigDecimal) -> [ Integer, BigDecimal ]

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - dup()
  # -->
  #
  def dup: () -> self

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Tests for value equality; returns true if the values are equal.
  #
  # The == and === operators and the eql? method have the same implementation for
  # BigDecimal.
  #
  # Values may be coerced to perform the comparison:
  #
  #     BigDecimal('1.0') == 1.0  #=> true
  #
  def eql?: (untyped) -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - exponent()
  # -->
  # Returns the exponent of the BigDecimal number, as an Integer.
  #
  # If the number can be represented as 0.xxxxxx*10**n where xxxxxx is a string of
  # digits with no leading zeros, then n is the exponent.
  #
  def exponent: () -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - finite?()
  # -->
  # Returns True if the value is finite (not NaN or infinite).
  #
  def finite?: () -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - fix()
  # -->
  # Return the integer part of the number, as a BigDecimal.
  #
  def fix: () -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - floor(n)
  # -->
  # Return the largest integer less than or equal to the value, as a BigDecimal.
  #
  #     BigDecimal('3.14159').floor #=> 3
  #     BigDecimal('-9.1').floor #=> -10
  #
  # If n is specified and positive, the fractional part of the result has no more
  # than that many digits.
  #
  # If n is specified and negative, at least that many digits to the left of the
  # decimal point will be 0 in the result.
  #
  #     BigDecimal('3.14159').floor(3) #=> 3.141
  #     BigDecimal('13345.234').floor(-2) #=> 13300.0
  #
  def floor: () -> Integer
           | (int n) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - frac()
  # -->
  # Return the fractional part of the number, as a BigDecimal.
  #
  def frac: () -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - hash -> integer
  # -->
  # Returns the integer hash value for `self`.
  #
  # Two instances of BigDecimal have the same hash value if and only if they have
  # equal:
  #
  # *   Sign.
  # *   Fractional part.
  # *   Exponent.
  #
  def hash: () -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - infinite?()
  # -->
  # Returns nil, -1, or +1 depending on whether the value is finite, -Infinity, or
  # +Infinity.
  #
  def infinite?: () -> Integer?

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - inspect()
  # -->
  # Returns a string representation of self.
  #
  #     BigDecimal("1234.5678").inspect
  #       #=> "0.12345678e4"
  #
  def inspect: () -> String

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Returns the modulus from dividing by b.
  #
  # See BigDecimal#divmod.
  #
  def modulo: (real | BigDecimal b) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - mult(other, ndigits) -> bigdecimal
  # -->
  # Returns the BigDecimal product of `self` and `value` with a precision of
  # `ndigits` decimal digits.
  #
  # When `ndigits` is less than the number of significant digits in the sum, the
  # sum is rounded to that number of digits, according to the current rounding
  # mode; see BigDecimal.mode.
  #
  # Examples:
  #
  #     # Set the rounding mode.
  #     BigDecimal.mode(BigDecimal::ROUND_MODE, :half_up)
  #     b = BigDecimal('555555.555')
  #     b.mult(3, 0)              # => 0.1666666665e7
  #     b.mult(3, 3)              # => 0.167e7
  #     b.mult(3, 6)              # => 0.166667e7
  #     b.mult(3, 15)             # => 0.1666666665e7
  #     b.mult(3.0, 0)            # => 0.1666666665e7
  #     b.mult(Rational(3, 1), 0) # => 0.1666666665e7
  #     b.mult(Complex(3, 0), 0)  # => (0.1666666665e7+0.0i)
  #
  def mult: (real | BigDecimal value, int digits) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - nan?()
  # -->
  # Returns True if the value is Not a Number.
  #
  def nan?: () -> bool

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - nonzero?()
  # -->
  # Returns self if the value is non-zero, nil otherwise.
  #
  def nonzero?: () -> self?

  # <!--
  #   rdoc-file=lib/bigdecimal.rb
  #   - power(n)
  #   - power(n, prec)
  # -->
  # Returns the value raised to the power of n.
  #
  # Also available as the operator **.
  #
  def power: (real | BigDecimal n, ?int prec) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - quo(value)  -> bigdecimal
  #   - quo(value, digits)  -> bigdecimal
  # -->
  # Divide by the specified value.
  #
  # digits
  # :   If specified and less than the number of significant digits of the result,
  #     the result is rounded to the given number of digits, according to the
  #     rounding mode indicated by BigDecimal.mode.
  #
  #     If digits is 0 or omitted, the result is the same as for the / operator.
  #
  #
  # See BigDecimal#/. See BigDecimal#div.
  #
  def quo: (real | BigDecimal) -> BigDecimal
         | (Complex) -> Complex

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - remainder(value)
  # -->
  # Returns the remainder from dividing by the value.
  #
  # x.remainder(y) means x-y*(x/y).truncate
  #
  def remainder: (real | BigDecimal) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - round(n, mode)
  # -->
  # Round to the nearest integer (by default), returning the result as a
  # BigDecimal if n is specified, or as an Integer if it isn't.
  #
  #     BigDecimal('3.14159').round #=> 3
  #     BigDecimal('8.7').round #=> 9
  #     BigDecimal('-9.9').round #=> -10
  #
  #     BigDecimal('3.14159').round(2).class.name #=> "BigDecimal"
  #     BigDecimal('3.14159').round.class.name #=> "Integer"
  #
  # If n is specified and positive, the fractional part of the result has no more
  # than that many digits.
  #
  # If n is specified and negative, at least that many digits to the left of the
  # decimal point will be 0 in the result, and return value will be an Integer.
  #
  #     BigDecimal('3.14159').round(3) #=> 3.142
  #     BigDecimal('13345.234').round(-2) #=> 13300
  #
  # The value of the optional mode argument can be used to determine how rounding
  # is performed; see BigDecimal.mode.
  #
  def round: () -> Integer
           | (int n) -> (Integer | BigDecimal)
           | (int n, round_mode_integer | round_mode_symbol) -> BigDecimal
           | (?int n, half: :up | :down | :even) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - sign()
  # -->
  # Returns the sign of the value.
  #
  # Returns a positive value if > 0, a negative value if < 0. It behaves the same
  # with zeros - it returns a positive value for a positive zero (BigDecimal('0'))
  # and a negative value for a negative zero (BigDecimal('-0')).
  #
  # The specific value returned indicates the type and sign of the BigDecimal, as
  # follows:
  #
  # BigDecimal::SIGN_NaN
  # :   value is Not a Number
  #
  # BigDecimal::SIGN_POSITIVE_ZERO
  # :   value is +0
  #
  # BigDecimal::SIGN_NEGATIVE_ZERO
  # :   value is -0
  #
  # BigDecimal::SIGN_POSITIVE_INFINITE
  # :   value is +Infinity
  #
  # BigDecimal::SIGN_NEGATIVE_INFINITE
  # :   value is -Infinity
  #
  # BigDecimal::SIGN_POSITIVE_FINITE
  # :   value is positive
  #
  # BigDecimal::SIGN_NEGATIVE_FINITE
  # :   value is negative
  #
  def sign: () -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - split()
  # -->
  # Splits a BigDecimal number into four parts, returned as an array of values.
  #
  # The first value represents the sign of the BigDecimal, and is -1 or 1, or 0 if
  # the BigDecimal is Not a Number.
  #
  # The second value is a string representing the significant digits of the
  # BigDecimal, with no leading zeros.
  #
  # The third value is the base used for arithmetic (currently always 10) as an
  # Integer.
  #
  # The fourth value is an Integer exponent.
  #
  # If the BigDecimal can be represented as 0.xxxxxx*10**n, then xxxxxx is the
  # string of significant digits with no leading zeros, and n is the exponent.
  #
  # From these values, you can translate a BigDecimal to a float as follows:
  #
  #     sign, significant_digits, base, exponent = a.split
  #     f = sign * "0.#{significant_digits}".to_f * (base ** exponent)
  #
  # (Note that the to_f method is provided as a more convenient way to translate a
  # BigDecimal to a Float.)
  #
  def split: () -> [ Integer, String, Integer, Integer ]

  # <!--
  #   rdoc-file=lib/bigdecimal.rb
  #   - sqrt(prec)
  # -->
  # Returns the square root of the value.
  #
  # Result has at least prec significant digits.
  #
  def sqrt: (int n) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - sub(value, digits)  -> bigdecimal
  # -->
  # Subtract the specified value.
  #
  # e.g.
  #     c = a.sub(b,n)
  #
  # digits
  # :   If specified and less than the number of significant digits of the result,
  #     the result is rounded to that number of digits, according to
  #     BigDecimal.mode.
  #
  def sub: (real | BigDecimal value, int digits) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - to_f()
  # -->
  # Returns a new Float object having approximately the same value as the
  # BigDecimal number. Normal accuracy limits and built-in errors of binary Float
  # arithmetic apply.
  #
  def to_f: () -> Float

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - to_i()
  # -->
  # Returns the value as an Integer.
  #
  # If the BigDecimal is infinity or NaN, raises FloatDomainError.
  #
  def to_i: () -> Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Returns the value as an Integer.
  #
  # If the BigDecimal is infinity or NaN, raises FloatDomainError.
  #
  def to_int: () -> Integer

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - to_r()
  # -->
  # Converts a BigDecimal to a Rational.
  #
  def to_r: () -> Rational

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - to_s(s)
  # -->
  # Converts the value to a string.
  #
  # The default format looks like  0.xxxxEnn.
  #
  # The optional parameter s consists of either an integer; or an optional '+' or
  # ' ', followed by an optional number, followed by an optional 'E' or 'F'.
  #
  # If there is a '+' at the start of s, positive values are returned with a
  # leading '+'.
  #
  # A space at the start of s returns positive values with a leading space.
  #
  # If s contains a number, a space is inserted after each group of that many
  # digits, starting from '.' and counting outwards.
  #
  # If s ends with an 'E', engineering notation (0.xxxxEnn) is used.
  #
  # If s ends with an 'F', conventional floating point notation is used.
  #
  # Examples:
  #
  #     BigDecimal('-1234567890123.45678901234567890').to_s('5F')
  #       #=> '-123 45678 90123.45678 90123 45678 9'
  #
  #     BigDecimal('1234567890123.45678901234567890').to_s('+8F')
  #       #=> '+12345 67890123.45678901 23456789'
  #
  #     BigDecimal('1234567890123.45678901234567890').to_s(' F')
  #       #=> ' 1234567890123.4567890123456789'
  #
  def to_s: (?String | int s) -> String

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - truncate(n)
  # -->
  # Truncate to the nearest integer (by default), returning the result as a
  # BigDecimal.
  #
  #     BigDecimal('3.14159').truncate #=> 3
  #     BigDecimal('8.7').truncate #=> 8
  #     BigDecimal('-9.9').truncate #=> -9
  #
  # If n is specified and positive, the fractional part of the result has no more
  # than that many digits.
  #
  # If n is specified and negative, at least that many digits to the left of the
  # decimal point will be 0 in the result.
  #
  #     BigDecimal('3.14159').truncate(3) #=> 3.141
  #     BigDecimal('13345.234').truncate(-2) #=> 13300.0
  #
  def truncate: () -> Integer
              | (int n) -> BigDecimal

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - zero?()
  # -->
  # Returns True if the value is zero.
  #
  def zero?: () -> bool

  private

  def initialize_copy: (self) -> self

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Base value used in internal calculations.  On a 32 bit system, BASE is 10000,
  # indicating that calculation is done in groups of 4 digits. (If it were larger,
  # BASE**2 wouldn't fit in 32 bits, so you couldn't guarantee that two groups
  # could always be multiplied together without overflow.)
  #
  BASE: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines whether overflow, underflow or zero divide result in an exception
  # being thrown. See BigDecimal.mode.
  #
  EXCEPTION_ALL: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines what happens when the result of a computation is infinity.  See
  # BigDecimal.mode.
  #
  EXCEPTION_INFINITY: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines what happens when the result of a computation is not a number
  # (NaN). See BigDecimal.mode.
  #
  EXCEPTION_NaN: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines what happens when the result of a computation is an overflow (a
  # result too large to be represented). See BigDecimal.mode.
  #
  EXCEPTION_OVERFLOW: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines what happens when the result of a computation is an underflow (a
  # result too small to be represented). See BigDecimal.mode.
  #
  EXCEPTION_UNDERFLOW: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines what happens when a division by zero is performed. See
  # BigDecimal.mode.
  #
  EXCEPTION_ZERODIVIDE: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Special value constants
  #
  INFINITY: BigDecimal

  NAN: BigDecimal

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Round towards +Infinity. See BigDecimal.mode.
  #
  ROUND_CEILING: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that values should be rounded towards zero. See BigDecimal.mode.
  #
  ROUND_DOWN: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Round towards -Infinity. See BigDecimal.mode.
  #
  ROUND_FLOOR: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that digits >= 6 should be rounded up, others rounded down. See
  # BigDecimal.mode.
  #
  ROUND_HALF_DOWN: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Round towards the even neighbor. See BigDecimal.mode.
  #
  ROUND_HALF_EVEN: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that digits >= 5 should be rounded up, others rounded down. See
  # BigDecimal.mode.
  #
  ROUND_HALF_UP: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Determines what happens when a result must be rounded in order to fit in the
  # appropriate number of significant digits. See BigDecimal.mode.
  #
  ROUND_MODE: round_mode

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that values should be rounded away from zero. See BigDecimal.mode.
  #
  ROUND_UP: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is negative and finite. See BigDecimal.sign.
  #
  SIGN_NEGATIVE_FINITE: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is negative and infinite. See BigDecimal.sign.
  #
  SIGN_NEGATIVE_INFINITE: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is -0. See BigDecimal.sign.
  #
  SIGN_NEGATIVE_ZERO: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is not a number. See BigDecimal.sign.
  #
  SIGN_NaN: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is positive and finite. See BigDecimal.sign.
  #
  SIGN_POSITIVE_FINITE: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is positive and infinite. See BigDecimal.sign.
  #
  SIGN_POSITIVE_INFINITE: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # Indicates that a value is +0. See BigDecimal.sign.
  #
  SIGN_POSITIVE_ZERO: Integer

  # <!-- rdoc-file=ext/bigdecimal/bigdecimal.c -->
  # The version of bigdecimal library
  #
  VERSION: String
end

%a{annotate:rdoc:skip}
module Kernel
  private

  # <!--
  #   rdoc-file=ext/bigdecimal/bigdecimal.c
  #   - BigDecimal(value, exception: true) -> bigdecimal
  #   - BigDecimal(value, ndigits, exception: true) -> bigdecimal
  # -->
  # Returns the BigDecimal converted from `value` with a precision of `ndigits`
  # decimal digits.
  #
  # When `ndigits` is less than the number of significant digits in the value, the
  # result is rounded to that number of digits, according to the current rounding
  # mode; see BigDecimal.mode.
  #
  # When `ndigits` is 0, the number of digits to correctly represent a float
  # number is determined automatically.
  #
  # Returns `value` converted to a BigDecimal, depending on the type of `value`:
  #
  # *   Integer, Float, Rational, Complex, or BigDecimal: converted directly:
  #
  #         # Integer, Complex, or BigDecimal value does not require ndigits; ignored if given.
  #         BigDecimal(2)                     # => 0.2e1
  #         BigDecimal(Complex(2, 0))         # => 0.2e1
  #         BigDecimal(BigDecimal(2))         # => 0.2e1
  #         # Float or Rational value requires ndigits.
  #         BigDecimal(2.0, 0)                # => 0.2e1
  #         BigDecimal(Rational(2, 1), 0)     # => 0.2e1
  #
  # *   String: converted by parsing if it contains an integer or floating-point
  #     literal; leading and trailing whitespace is ignored:
  #
  #         # String does not require ndigits; ignored if given.
  #         BigDecimal('2')     # => 0.2e1
  #         BigDecimal('2.0')   # => 0.2e1
  #         BigDecimal('0.2e1') # => 0.2e1
  #         BigDecimal(' 2.0 ') # => 0.2e1
  #
  # *   Other type that responds to method `:to_str`: first converted to a string,
  #     then converted to a BigDecimal, as above.
  #
  # *   Other type:
  #
  #     *   Raises an exception if keyword argument `exception` is `true`.
  #     *   Returns `nil` if keyword argument `exception` is `false`.
  #
  # Raises an exception if `value` evaluates to a Float and `digits` is larger
  # than Float::DIG + 1.
  #
  def self?.BigDecimal: (real | string | BigDecimal initial, ?int digits, ?exception: bool) -> BigDecimal
end

%a{annotate:rdoc:skip}
class Integer
  # <!--
  #   rdoc-file=numeric.c
  #   - self / numeric -> numeric_result
  # -->
  # Performs division; for integer `numeric`, truncates the result to an integer:
  #
  #      4 / 3              # => 1
  #      4 / -3             # => -2
  #      -4 / 3             # => -2
  #      -4 / -3            # => 1
  #
  #     For other +numeric+, returns non-integer result:
  #
  #      4 / 3.0            # => 1.3333333333333333
  #      4 / Rational(3, 1) # => (4/3)
  #      4 / Complex(3, 0)  # => ((4/3)+0i)
  #
  def /: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=numeric.c
  #   - self * numeric -> numeric_result
  # -->
  # Performs multiplication:
  #
  #     4 * 2              # => 8
  #     4 * -2             # => -8
  #     -4 * 2             # => -8
  #     4 * 2.0            # => 8.0
  #     4 * Rational(1, 3) # => (4/3)
  #     4 * Complex(2, 0)  # => (8+0i)
  #
  def *: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=numeric.c
  #   - self + numeric -> numeric_result
  # -->
  # Performs addition:
  #
  #     2 + 2              # => 4
  #     -2 + 2             # => 0
  #     -2 + -2            # => -4
  #     2 + 2.0            # => 4.0
  #     2 + Rational(2, 1) # => (4/1)
  #     2 + Complex(2, 0)  # => (4+0i)
  #
  def +: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=numeric.c
  #   - self - numeric -> numeric_result
  # -->
  # Performs subtraction:
  #
  #     4 - 2              # => 2
  #     -4 - 2             # => -6
  #     -4 - -2            # => -2
  #     4 - 2.0            # => 2.0
  #     4 - Rational(2, 1) # => (2/1)
  #     4 - Complex(2, 0)  # => (2+0i)
  #
  def -: (BigDecimal) -> BigDecimal
       | ...
end

%a{annotate:rdoc:skip}
class Float
  # <!--
  #   rdoc-file=numeric.c
  #   - self / other -> numeric
  # -->
  # Returns a new Float which is the result of dividing `self` by `other`:
  #
  #     f = 3.14
  #     f / 2              # => 1.57
  #     f / 2.0            # => 1.57
  #     f / Rational(2, 1) # => 1.57
  #     f / Complex(2, 0)  # => (1.57+0.0i)
  #
  def /: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=numeric.c
  #   - self * other -> numeric
  # -->
  # Returns a new Float which is the product of `self` and `other`:
  #
  #     f = 3.14
  #     f * 2              # => 6.28
  #     f * 2.0            # => 6.28
  #     f * Rational(1, 2) # => 1.57
  #     f * Complex(2, 0)  # => (6.28+0.0i)
  #
  def *: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=numeric.c
  #   - self + other -> numeric
  # -->
  # Returns a new Float which is the sum of `self` and `other`:
  #
  #     f = 3.14
  #     f + 1                 # => 4.140000000000001
  #     f + 1.0               # => 4.140000000000001
  #     f + Rational(1, 1)    # => 4.140000000000001
  #     f + Complex(1, 0)     # => (4.140000000000001+0i)
  #
  def +: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=numeric.c
  #   - self - other -> numeric
  # -->
  # Returns a new Float which is the difference of `self` and `other`:
  #
  #     f = 3.14
  #     f - 1                 # => 2.14
  #     f - 1.0               # => 2.14
  #     f - Rational(1, 1)    # => 2.14
  #     f - Complex(1, 0)     # => (2.14+0i)
  #
  def -: (BigDecimal) -> BigDecimal
       | ...
end

%a{annotate:rdoc:skip}
class Rational
  # <!--
  #   rdoc-file=rational.c
  #   - rat / numeric     ->  numeric
  #   - rat.quo(numeric)  ->  numeric
  # -->
  # Performs division.
  #
  #     Rational(2, 3)  / Rational(2, 3)   #=> (1/1)
  #     Rational(900)   / Rational(1)      #=> (900/1)
  #     Rational(-2, 9) / Rational(-9, 2)  #=> (4/81)
  #     Rational(9, 8)  / 4                #=> (9/32)
  #     Rational(20, 9) / 9.8              #=> 0.22675736961451246
  #
  def /: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=rational.c
  #   - rat * numeric  ->  numeric
  # -->
  # Performs multiplication.
  #
  #     Rational(2, 3)  * Rational(2, 3)   #=> (4/9)
  #     Rational(900)   * Rational(1)      #=> (900/1)
  #     Rational(-2, 9) * Rational(-9, 2)  #=> (1/1)
  #     Rational(9, 8)  * 4                #=> (9/2)
  #     Rational(20, 9) * 9.8              #=> 21.77777777777778
  #
  def *: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=rational.c
  #   - rat + numeric  ->  numeric
  # -->
  # Performs addition.
  #
  #     Rational(2, 3)  + Rational(2, 3)   #=> (4/3)
  #     Rational(900)   + Rational(1)      #=> (901/1)
  #     Rational(-2, 9) + Rational(-9, 2)  #=> (-85/18)
  #     Rational(9, 8)  + 4                #=> (41/8)
  #     Rational(20, 9) + 9.8              #=> 12.022222222222222
  #
  def +: (BigDecimal) -> BigDecimal
       | ...

  # <!--
  #   rdoc-file=rational.c
  #   - rat - numeric  ->  numeric
  # -->
  # Performs subtraction.
  #
  #     Rational(2, 3)  - Rational(2, 3)   #=> (0/1)
  #     Rational(900)   - Rational(1)      #=> (899/1)
  #     Rational(-2, 9) - Rational(-9, 2)  #=> (77/18)
  #     Rational(9, 8)  - 4                #=> (-23/8)
  #     Rational(20, 9) - 9.8              #=> -7.577777777777778
  #
  def -: (BigDecimal) -> BigDecimal
       | ...
end

%a{annotate:rdoc:skip}
class Complex
  # <!--
  #   rdoc-file=complex.c
  #   - complex / numeric -> new_complex
  # -->
  # Returns the quotient of `self` and `numeric`:
  #
  #     Complex.rect(2, 3)  / Complex.rect(2, 3)  # => (1+0i)
  #     Complex.rect(900)   / Complex.rect(1)     # => (900+0i)
  #     Complex.rect(-2, 9) / Complex.rect(-9, 2) # => ((36/85)-(77/85)*i)
  #     Complex.rect(9, 8)  / 4                   # => ((9/4)+2i)
  #     Complex.rect(20, 9) / 9.8                 # => (2.0408163265306123+0.9183673469387754i)
  #
  def /: (BigDecimal) -> Complex
       | ...

  # <!--
  #   rdoc-file=complex.c
  #   - complex * numeric -> new_complex
  # -->
  # Returns the product of `self` and `numeric`:
  #
  #     Complex.rect(2, 3)  * Complex.rect(2, 3)  # => (-5+12i)
  #     Complex.rect(900)   * Complex.rect(1)     # => (900+0i)
  #     Complex.rect(-2, 9) * Complex.rect(-9, 2) # => (0-85i)
  #     Complex.rect(9, 8)  * 4                   # => (36+32i)
  #     Complex.rect(20, 9) * 9.8                 # => (196.0+88.2i)
  #
  def *: (BigDecimal) -> Complex
       | ...

  # <!--
  #   rdoc-file=complex.c
  #   - complex + numeric -> new_complex
  # -->
  # Returns the sum of `self` and `numeric`:
  #
  #     Complex.rect(2, 3)  + Complex.rect(2, 3)  # => (4+6i)
  #     Complex.rect(900)   + Complex.rect(1)     # => (901+0i)
  #     Complex.rect(-2, 9) + Complex.rect(-9, 2) # => (-11+11i)
  #     Complex.rect(9, 8)  + 4                   # => (13+8i)
  #     Complex.rect(20, 9) + 9.8                 # => (29.8+9i)
  #
  def +: (BigDecimal) -> Complex
       | ...

  # <!--
  #   rdoc-file=complex.c
  #   - complex - numeric -> new_complex
  # -->
  # Returns the difference of `self` and `numeric`:
  #
  #     Complex.rect(2, 3)  - Complex.rect(2, 3)  # => (0+0i)
  #     Complex.rect(900)   - Complex.rect(1)     # => (899+0i)
  #     Complex.rect(-2, 9) - Complex.rect(-9, 2) # => (7+7i)
  #     Complex.rect(9, 8)  - 4                   # => (5+8i)
  #     Complex.rect(20, 9) - 9.8                 # => (10.2+9i)
  #
  def -: (BigDecimal) -> Complex
       | ...
end